• Mar 14, 2025

Before First Use

1, How to unpack the unit?

  1. Cut off the packing straps;
  2. Hold the bottom of the outer carton and lift it up to remove.
  3. Grasp the handle holes of the inner box and lift it up to remove it.
  4. Remove the top paper corner protector, left and right foams.
  5. Lift the  machine off the bottom foam board, remove the protective film  bag and fixation tapes.

2, What should you do before using it for the first time?

  1. Leave the machine upright at least 4 hours
  2. Check if the rated voltage and frequency on rating label are the same as the specifications of the household power supply;
  3. Check if power cord and plug of the product are damaged or not. If yes, please call service center for help.
  4. Take out the front grille, check whether there is a water tank inside, and whether the water tank is damaged. If there is a problem, please call service center for help.

3, What are the requirements for using places?

  1. Please keep the machine upright when moving it, and use it on a stable and level surface.
  2. Do not install the machine in a room with open flames (such as lit gas appliances) or ignition sources (such as working electric heaters).
  3. Ensure that there is sufficient space around the machine, and the machine should be away from walls, furniture or curtains at least 30cm.

4, How to install the water tank?

  1. When you need to start AC function, please fill the water tank with water and install the water tank with the water  outlet  facing  downwards  as  indicated  on  the  product.  Otherwise,  the machine will alarm and indicate water shortage.
  2. When you need to activate the dehumidifying function, please drain the water in the water tank and install the water tank with the water outlet facing upwards as indicated on the product. Otherwise, the machine will alarm and prompt that the water tank is full.

5, How to connect the power source?

  1. Do not share sockets with other electrical appliances.
  2. Ensure that the power cord is not pressed by hard objects.
  3. Do not pull the power cord to unplug or move the machine.
  4. Do not use wet hands to plug or unplug the power plug.

6, How to power on and start the machine?

  1. After plug into socket, the machine is automatically powered on and off.
  2. Press the “start ” button to turn the machine on. Press the "start" button again to turn it off.

7, How to start fanning?

  1. After connecting the machine with power source and turning on the machine, please press the "fan" button to start it, when it is not in fanning mode.
  2. When it is in fanning mode, pressing the "fan" button to adjust the fan speed. There are 3 fan speeds for your options: Low("LO") - High("HI") - Speedily("SP")

8, How to start AC function?

  1. Before starting AC function, please fill the water tank with water and install the water tank with  the  water  outlet  facing  downwards  as  indicated  on  the  product.  Otherwise,  the machine will alarm and indicate water shortage.
  2. After connecting the machine with power source and turning on the machine, please press the "cooling" button to start it, when it is not cooling mode.
  3. When it is in cooling mode, pressing the "Cooling" button to adjust the fan speed. There are 4 fan speeds for your options: Low("LO") - High("HI") - Speedily("SP") - Longlasting comfort mode

9, How to start dehumidifying?

  1. Before starting dehumidifying function, please drain the water in the water tank and install the water tank with the water outlet facing upwards as indicated on the product. Otherwise, the machine will alarm and prompt that the water tank is full.
  2. After connecting the machine with power source and turning on the machine, please press the "dry " button to start it, when it is not dehumidifying mode.
  3. The fan speed is Low("LO") and could not be changed.

10, How to start fan swing?

  1. After connecting the  machine with  power source and turning on the machine, no matter what mode is started, you can turn the fan swing on by pressing the buttons.
  2. Press the "swing left and right" button to start horizontal swing,
  3. Press the "swing up and down" button to start vertical swing.

11, How to set timer?

  1. After connecting the  machine with  power source and turning on the machine, no matter what mode is started,press the "Time/Light" button to activate the timer function.
  2. Each press will increase the time by 10 minutes. After setting the time, wait for 3 seconds and the time on UI will flash, indicating that the time setting is successful.
  3. If you want to cancel the timing, press the timing/light button and set the time to "00min" and waiting for 3s.

12, How to connect the Wi-Fi?

After connecting the machine with power source and turning on the machine, please follow procedure below to connect Wi-Fi:

  1. Press  the  "start"  button  for  3s  to  activate  WI FI  connection.  The   "WI FI"  light  flashes, indicating that The machine is waiting to be connected and matched.
  2. Scan the QR code posted on the back of the machine with your smart phone and download the "Morphy Richards Smart" app.
  3. Register and log into the app.
  4. Go to “ Home Page” and click “Add Device”.    Before adding the device, you need to turn on the WI FI function and Bluetooth function of your phone.
  5. After adding the device, you can control the machine through the App bu clicking the icons.
    5.1   At the top of the control page, the  “ Start ”button and some important values of the current environment and the machine will be displayed.
    The “Child Lock”and “Ambient Light”  buttons are on the right. You can lock and unlock the child lock, or turn the ambient light on and off.
    5.2   There are 3 working modes for your options: cooling, dehumidifying, fanning.
  6. There  are 4 fan speeds  in cooling mode for your options, and 3 fan speeds in the fanning mode. However, in the dehumidifying mode, there is no fan speed options for you.
  7. In these 3 working modes, you can turn the fan swing on and off.
  8. In these 3 working modes, you can turn on the shutdown timer and set the running time.