Clean machine body

    When you want to use the machine again after not using it for a long time, please clean the machine body and filter mesh.

Specific steps

Step 1: Turn the machine off. Wet the towel and wipe around the machine with a wet towel.

Step 2: Then dry the water stain with a dry towel.

NOTE: Please note that the wet towel should not be too wet and the surface of the towel should not drip during using.

Clean filter mesh

    It is recommended to clean the dust filter once every two weeks to ensure a healthy environment and energy saving.

Specific steps

Step 1: Turn the machine off. Remove the filter screens in left and right upper sides.  

Step 2: Pull out the L-side grille and R-side grille, and take out the side filter screens from both side grilles, and pull out the back grille and take out the back filter screen from it.

Step 3: Clean these screens by towel or brush, and rinse them with clean water.

Step 4: Dry them with a dry towel or place them in a ventilated place.

Step 5: Please reverse the above steps and reinstall the filter screens after drying.

 

Clean water tank

Specific steps

Step 1: Pull down to remove the front grille and pull out the water tank.

Step 2: Pour a little water into the water tank.

Step 3: shake the water tank, and let clear water fully flush the inner wall of the water tank.

NOTE: You can add appropriate amount of detergent into the water tank.

Step 4: Pour out the water and rinse the water tank repeatedly for 1-2 times.

Drain waste water

    When you want to use the machine again after not using it for a long time, please check whether the drain plug of the water tray is installed properly.

Specific steps

Step 1: Turn the machine off in any mode and unplug the power plug.

Step 2: Find a container to collect water and place it under the water outlet. Or move the machine directly to the drain outlet.

Step 3: Unscrew the drain cap and gently pull out the rubber plug. Drain until no water comes out.